Citiglass International Group

Building Glass

	Insulating Glass

Click to enlarge image

Model Number

5mm+6A+5mm LOWE

Insulated Glass (with LOW E Glass)

Introduction

The insulated glass is a prefabricated unit made of two or more glass sheets with alloy aluminum frame filled with descant between, which are edge-sealed together with compound sealing glue.

Product Characteristics
1.Energy saving, noise-insulation, warm keeping, dew proof.
2.Charging in special gases, such as argon gas may further improve heat and sound insulation.

Product Specifications
Maximum size: 2400mmx4500mm
Minimum size: 200mmx200mm
Maximum thickness: 60mm
Aluminum spacer width:
6mm, 9mm, 12mm, 15mm and 18mm .

Standards: JISR3205; BS6206.

Packing
By strong sea-worthy wooden crates.

　Low-E Glass

Introduction The Low-E glass is produced by plating a nanometer-level silver layer on the excellent quality float glass, by means of vacuum magnetron sputtering. It allows the sun's heat and light to pass through the glass into the building. At the same time it blocks heat from leaving the room, reducing heat loss considerably. It may reduce the emission of the glass from 0.84 to 0.1, the radiant heat waste may be reduced by 90%. Product Characteristics The Low-E glass is able to reflect the far infrared heat energy, compared with the normal coated glass it allows the highly visible light to transmit, as well as a low outward reflection. If it is made to insulating glass, it can make an economy air condition expense in summer and saving the heating cost in winter, which results in an energy saving. The Low-E glass can only be made into combined products and has a good performance of soundproof.